MB-02-V6 Bidirectional Breakout Board

The MB-02-V6 is a simple but robust breakout board that provides a convenient and safe way to interface your CNC components to your PC via the parallel port. Additionally the Breakout board may be used to connect your CNC components to a Smooth Stepper or other motion system.

The MB-02 provides screw terminals for all printer port signals. The 5Vdc power for the MB-02 can be obtained from the USB connector, pin 26 of the ICD connector or via the 3.5mm screw terminals.T he form factor of the MB-02 Breakout board PCB has been designed for easy installation. Due to its compact size, it can also be easily installed into CNC controller enclosures. The main features of the MB-02V6 Bidirectional Breakout board are;

  • Small PCB footprint 92mm(L) x 65mm(W) 
  • Four 4mm mounting holes (supplied with matching stand-offs) 
  • Single 5V dc power requirements.
  • USB-B connector can be used to provide 5V supply from PC 
  • Common” supply terminals are selectable as 0V or 5V
  • Pull-up resistors on inputs and outputs ensuring known output/input states
  • Separate Pullups for Inputs, Outputs and D2-D9 pins 
  • Pull-ups voltage selectable between 0V or 5V 
  • Active high and Active low Enable inputs 
  • All inputs and outputs are buffered and capable of supplying 24mA 
  • Inputs can be 3.3V, or 5V logic levels 
  • Parallel port pins D2 - D9 can be configured as inputs or outputs via jumper 
  • DE-25 Female connector and IDC26 header for connection to PC/SmoothStepper. 
  • Designed to work with popular CNC software such as Mach3, TurboCNC, EMC2, etc. 
  • Designed to work with popular CNC hardware such as SmoothStepper, GeckoDrive, Rutex, etc 
  • 3.5mm terminal block connectors for easy installation and maintenance.
  • LED Indicator for Board Enable Status
  • Charge Pump Enable detect (Pin17)
  • LED indicators for all parallel Port Signals
  • Jumpers for Enable input overrides. 
  • New V6 Features
    • Separate Pullup/Down jumpers for 
      • Parallel Port Bidirection pins 2 - 9
      • Parallel Port Input Pins 10,11,12,13,15
      • Parallel port Output Pins 1,14,16,17
    • IEEE 1284 compatible interface circuitry.


 MB-02 V6 User Manual R3

 

EN008 MB-02 V6 Breakout Board Overview 

EN009 MB-02 Breakout Board to Gecko G251 Stepper System Schematic 

EN012 MB-02V6 Breakout Board to Gecko G203V Stepper System Schematic 

EN019 MB-02V6 Breakout Board to 5-Axis Gecko™ G251 Schematic 

MB-02V6 Breakout Board to Gecko G201X Schematic 

MB-02V6 Breakout Board to Gecko G320X Schematic 

MB-02V6 Tool Plate Wiring Schematic 


  • Model:
    [MB-02]
  • Shipping Weight: 0.1kgs

MB-02-V6 Bidirectional Breakout Board

MB-02-V6 Bidirectional Breakout Board

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock

wabusiness template