All Products





1/2" 120° Replacment Diamond

Add:
1/2" 120° Replacment Diamond
Model: BP-07
US$25.00 Ex GST
US$27.50 Inc GST


Weight: 0.05kgs


120° replacement tip for the 1/2" Diamond Drag Engraving Tool.

1/2" 150° Replacment Diamond

Add:
1/2" 150° Replacment Diamond
Model: BP-18
US$25.00 Ex GST
US$27.50 Inc GST


Weight: 0.05kgs


150° replacement tip for the 1/2" Diamond Drag Engraving Tool.

1/2" 90° Replacment Diamond

Add:
1/2" 90° Replacment Diamond
Model: BP-09
US$25.00 Ex GST
US$27.50 Inc GST


Weight: 0.05kgs


90° replacement tip for the 1/2" Diamond Drag Engraving Tool.

1/2" 75° Replacment Diamond

... more info
 Sold Out 
1/2" 75° Replacment Diamond
Model: BP-08
US$25.00 Ex GST
US$27.50 Inc GST


Weight: 0.05kgs


75° replacement tip for the 1/2" Diamond Drag Engraving Tool.

1/2" Diamond Drag Engraving Tool

Add:
1/2" Diamond Drag Engraving Tool
Model: BP-03
US$58.00 Ex GST
US$63.80 Inc GST


Weight: 0.1kgs


The diamond drag engraving tool utilises a spring loaded design to account for deviations in material. By using a diamond tipped tool, there is no...
... more info

1/4" 120° Replacment Diamond

Add:
1/4" 120° Replacment Diamond
Model: BP-11
US$24.00 Ex GST
US$26.40 Inc GST


Weight: 0.05kgs


120° replacement tip for the 1/4" Diamond Drag Engraving Tool.

1/4" 150° Replacment Diamond

... more info
 Sold Out 
1/4" 150° Replacment Diamond
Model: BP-19
US$24.00 Ex GST
US$26.40 Inc GST


Weight: 0.05kgs


150° replacement tip for the 1/4" Diamond Drag Engraving Tool.

1/4" 60° Replacment Diamond

... more info
 Sold Out 
1/4" 60° Replacment Diamond
Model: BP-04
US$24.00 Ex GST
US$26.40 Inc GST


Weight: 0.05kgs


60° replacement tip for the 1/4" Diamond Drag Engraving Tool.

1/4" 75° Replacment Diamond

... more info
 Sold Out 
1/4" 75° Replacment Diamond
Model: BP-05
US$24.00 Ex GST
US$26.40 Inc GST


Weight: 0.05kgs


75° replacement tip for the 1/4" Diamond Drag Engraving Tool.

1/4" 90° Replacment Diamond

... more info
 Sold Out 
1/4" 90° Replacment Diamond
Model: BP-06
US$24.00 Ex GST
US$26.40 Inc GST


Weight: 0.05kgs


90° replacement tip for the 1/4" Diamond Drag Engraving Tool.

1/4" Diamond Drag Engraving Tool

Add:
1/4" Diamond Drag Engraving Tool
Model: BP-02
US$58.00 Ex GST
US$63.80 Inc GST


Weight: 0.05kgs


The diamond drag engraving tool utilises a spring loaded design to account for deviations in material. By using a diamond tipped tool, there is no...
... more info

1/4" Shaft Spring Loaded Engraving Tool

... more info
 Sold Out 
1/4" Shaft Spring Loaded Engraving Tool
Model: BP-10
US$109.99 Ex GST
US$120.99 Inc GST


Weight: 0.05kgs


The spring loaded design allows a constant depth engraving over an uneven surface. This saves valuable time when setting up for engraving. The tool...
... more info

100 pack Gecko G250X Micro Stepping drive

Add:
100 pack Gecko G250X Micro Stepping drive
Model: G250x-100
US$5,600.00 Ex GST
US$6,160.00 Inc GST


Weight: 2kgs


The G250X is one of Geckodrive's newest low-price, high-quality step motor drives.The G250X is produced using brand new techniques allowing it...
... more info

115Vac 80mm x 80mm x 38mm Fan

Add:
115Vac 80mm x 80mm x 38mm Fan
Model: FA-01
US$7.80 Ex GST
US$8.58 Inc GST


Weight: 0.45kgs


115VAC 80mm x 80mm x 35mm metal ball bearing Fan. Perfect for cooling your controller. Note: If your mains voltage is 220-240VAC, put 2 of these fans...
... more info

12 Position Rotary Switch

Add:
12 Position Rotary Switch
Model: SW-02
US$3.00 Ex GST
US$3.30 Inc GST


Weight: 0.05kgs


12 position single pole rotary switch . Perfect for your CNC Control Panel or Pendant. Configurable from 1 pole 2 position through to 1 pole 12...
... more info

1200 Oz-in NEMA 34 Stepper Motor

Add:
1200 Oz-in NEMA 34 Stepper Motor
Model: SM-05
US$93.50 Ex GST
US$102.85 Inc GST


Weight: 3.8kgs


This is a single shaft bipolar  1200 oz-in Nema 34 Stepper Motor. Model Number: 4H2120-60-4A Specifications Size: Nema 34 Phase: 2 Phase Step...
... more info

12V 30A Panel Mount Relay

Add:
12V 30A Panel Mount Relay
Model: RL-02
US$11.00 Ex GST
US$12.10 Inc GST


Weight: 0.05kgs


Heavy Duty Chassis Mount Relays - 30A Used in heavy duty applications like air conditioning, heating, etc. - 12V, 120 ohm coil - Loads up to 7,500W...
... more info

12V to 12V Isolated DC/DC converter

Add:
12V to 12V Isolated DC/DC converter
Model: PS-07
US$10.95 Ex GST
US$12.05 Inc GST


Weight: 0.05kgs


This Isolated 1Watt DC/DC converter is for use on the following DigiSpeed Controllers; G5-BackPack From a 12Vdc input, the converter generates an...
... more info

12Vdc 80mm x 80mm x 25mm Fan

... more info
 Sold Out 
12Vdc 80mm x 80mm x 25mm Fan
Model: FA-02
US$5.00 Ex GST
US$5.50 Inc GST


Weight: 0.1kgs


Perfect for cooling your Controller. Air Flow: 39CFM Type: DC Brushless Speed: 2450 RPM Current: 0.23A Noise Level: 34dBA Manuf.: NMB

15" LCD Touch screen

... more info
 Sold Out 
15" LCD Touch screen
Model: HDC-03
US$230.00
US$205.00 Ex GST
Save: 11% off

US$225.50 Inc GST


Weight: 4kgs


15"LCD Touch Monitor

155 Oz-in NEMA 23 Stepper Motor (Dual Shaft)

Add:
155 Oz-in NEMA 23 Stepper Motor (Dual Shaft)
Model: SM-06
US$40.00
US$34.90 Ex GST
Save: 13% off

US$38.39 Inc GST


Weight: 0.7kgs


This is a dual shaft bipolar  155oz-in Nema 23 Stepper Motor, suitable for smaller Mills and lathes such as the Taig and Sherline machines. Model...
... more info

18 AWG Four Core Stepper Motor Cable

Add:
18 AWG Four Core Stepper Motor Cable
Model: CB-10
US$3.18 Ex GST
US$3.50 Inc GST


Weight: 0.09kgs


Super flexible four core cable perfect for larger stepper motors Cable Outer Diameter 7.5mmRed, Black, Blue, Yellow ConductorsConductors: 40x0.16mm2...
... more info

2 metre DB25 Male to DB25 Male printer port cable

Add:
2 metre DB25 Male to DB25 Male printer port cable
Model: CB-25
US$7.50 Ex GST
US$8.25 Inc GST


Weight: 0.25kgs


This is a 2 metre printer port cable with a DB25 male connector on both ends. Perfect for connecting your CNC controller to your computer.

2 metre IEC320 Power Lead

Add:
2 metre IEC320 Power Lead
Model: CB-16
US$4.90 Ex GST
US$5.39 Inc GST


Weight: 0.2kgs


3 metre mains lead with SAA Plug to IEC320 line socket. Perfect for powering your CNC controller.

2 Pin Plug and Socket set

Add:
2 Pin Plug and Socket set
Model: CN-02
US$4.00 Ex GST
US$4.40 Inc GST


Weight: 0.05kgs


Plug and socket set comprising of a chassis mount socket and a mating plug with a locking ring to ensure against accidental disconnections. 10A 100V...
... more info

22 AWG Four Core shielded Stepper Motor Cable

Add:
22 AWG Four Core shielded Stepper Motor Cable
Model: CB-09
US$2.91 Ex GST
US$3.20 Inc GST


Weight: 0.07kgs


Super flexible shielded four core cable perfect for stepper motors up to 3.5 A/Phase. This cable has been matched to work with the Gecko four Axis...
... more info

22 AWG Two Core shielded Limit Switch Cable

... more info
 Sold Out 
22 AWG Two Core shielded Limit Switch Cable
Model: CB-27
US$2.91 Ex GST
US$3.20 Inc GST


Weight: 0.07kgs


Super flexible shielded two core cable perfect for wiring up limit switches, or other components were good quality sheilded cable is needed.  ...
... more info

24-480Vac 25A SSR Solid State Relay

Add:
24-480Vac 25A SSR Solid State Relay
Model: RL-05
US$17.00 Ex GST
US$18.70 Inc GST


Weight: 0.09kgs


Single phase solid state relay.     Features:     Built-in varistor effectively absorb external surges Zero crossing turn on...
... more info

24V Multi-Colour Signal Tower (Green,Yellow,Red)

Add:
24V Multi-Colour Signal Tower (Green,Yellow,Red)
Model: IN-04
US$62.00 Ex GST
US$68.20 Inc GST


Weight: 0.35kgs


This 24V light tower contains three indicators Green, Yellow and Red. It is a perfect accessory for providing  the status  of your CNC machine and...
... more info

24V 30A Panel Mount Relay

Add:
24V 30A Panel Mount Relay
Model: RL-01
US$12.00 Ex GST
US$13.20 Inc GST


Weight: 0.05kgs


 24VDC Panel Mount Relay Rugged construction, panel mounted and quick connect terminals for easy installation. DPDT PANEL MOUNT RELAYS These...
... more info

26 pin IDC to 26 pin IDC Ribbon Cable

... more info
26 pin IDC to 26 pin IDC Ribbon Cable
Model: CB-07
US$7.49 Ex GST
US$8.24 Inc GST


Weight: 0.1kgs


Low Profile Header 26 pin connector on one end. Low Profile Header 26 pin connector on the other end. 300mm ribbon cable in between.

26 Pin to Female DB 25 Ribbon Cable

... more info
26 Pin to Female DB 25 Ribbon Cable
Model: CB-06
US$7.49 Ex GST
US$8.24 Inc GST


Weight: 0.1kgs


Low Profile Header 26 Pin connector on one end. Female DB25 connector on the other end of the ribbon cable. 300mm length

26 Pin to Male DB 25 Ribbon Cable

... more info
26 Pin to Male DB 25 Ribbon Cable
Model: CB-12
US$7.49 Ex GST
US$8.24 Inc GST


Weight: 0.1kgs


Low Profile Header 26 Pin connector on one end. Male DB25 connector on the other end of the ribbon cable. 300mm length

3 Pin Plug and Socket set

Add:
3 Pin Plug and Socket set
Model: CN-03
US$4.00 Ex GST
US$4.40 Inc GST


Weight: 0.05kgs


Plug and socket set comprising of a chassis mount socket and a mating plug with a locking ring to ensure against accidental disconnections. 10A 100V...
... more info

3.5mm Stereo Male to Male Cable

Add:
3.5mm Stereo Male to Male Cable
Model: CB-03
US$4.00 Ex GST
US$4.40 Inc GST


Weight: 0.1kgs


1.5 metre 3.5mm Stereo Cable for connecting your index pulse sensor to your breakout board via the DigiSpeed controller.

387 Oz-in NEMA 24 Stepper Motor (Dual Shaft)

Add:
387 Oz-in NEMA 24 Stepper Motor (Dual Shaft)
Model: SM-03
US$53.00 Ex GST
US$58.30 Inc GST


Weight: 1.4kgs


This is a dual shaft bipolar  387oz-in Nema 23  (60mm) Stepper Motor. This is the maximum size motor that can be used with the Geckodrive G540,...
... more info

3AG Panel Mount Fuse Holder

Add:
3AG Panel Mount Fuse Holder
Model: FH-01
US$3.69 Ex GST
US$4.06 Inc GST


Weight: 0.05kgs


3AG Approved Style Fuse Holder     3AG 10 amp 240V chassis mount (32 x 6.35mm)

3U Sub-Chassis 19" Rack Case

... more info
 Sold Out 
3U Sub-Chassis 19" Rack Case
Model: EN-92
US$115.00 Ex GST
US$126.50 Inc GST


Weight: 3kgs


This customisable rack case allows vertical or horizontal mounting of sub-chassis’ within the case. PCB’s and modules can be easily...
... more info

4 Axis Controller

... more info
4 Axis Controller
Model: HDC-01
US$876.00 Ex GST
US$963.60 Inc GST


Weight: 3.8kgs


This is a complete 4 axis ready to run controller.

4 Pin Plug and Socket set

Add:
4 Pin Plug and Socket set
Model: CN-04
US$4.00 Ex GST
US$4.40 Inc GST


Weight: 0.05kgs


Plug and socket set comprising of a chassis mount socket and a mating plug with a locking ring to ensure against accidental disconnections. 10A 100V...
... more info

400V 25Amps Bridge Rectifier

Add:
400V 25Amps Bridge Rectifier
Model: BR-254
US$2.00 Ex GST
US$2.20 Inc GST


Weight: 0.05kgs


400V 25Amp Bridge Rectifier. Perfect for your CNC Power Supply.

48V 20A Panel Mount Relay

Add:
48V 20A Panel Mount Relay
Model: RL-04
US$8.49 Ex GST
US$9.34 Inc GST


Weight: 0.032kgs


  48VDC Panel Mount Relay Rugged construction, panel mounted and quick connect terminals for easy installation.The relay contacts are normally...
... more info

5 metre DB25 Male to DB25 Male printer port cable

Add:
5 metre DB25 Male to DB25 Male printer port cable
Model: CB-24
US$14.80 Ex GST
US$16.28 Inc GST


Weight: 0.44kgs


This is a 5 metre printer port cable with a DB25 male connector on both ends. Perfect for connecting your CNC controller to your computer.

5 metre IEC320 Power Lead

Add:
5 metre IEC320 Power Lead
Model: CB-15
US$14.80 Ex GST
US$16.28 Inc GST


Weight: 0.25kgs


5 metre mains lead with SAA Plug to IEC320 line socket. Perfect for powering your CNC controller.

500x400x200 Metal Enclosure

... more info
 Sold Out 
500x400x200 Metal Enclosure
Model: EN-90
US$90.00 Ex GST
US$99.00 Inc GST


Weight: 12kgs


Metal Enclosure IP65  500mm x 400mm x 200mm - Galvanised Steel Powder coated 1.2mm galvanized steelSeams are continuously welded and ground...
... more info

570 Oz-in NEMA 24 Stepper Motor (Dual Shaft)

Add:
570 Oz-in NEMA 24 Stepper Motor (Dual Shaft)
Model: SM-08
US$60.00 Ex GST
US$66.00 Inc GST


Weight: 1.6kgs


This is a dual shaft bipolar  570oz-in Nema 24 (60mm) Stepper Motor. Model Number: 24H2100-50-4B Specifications Size: Nema 24 Phase: 2 Phase...
... more info

5V to 12V Isolated DC/DC converter

Add:
5V to 12V Isolated DC/DC converter
Model: PS-07
US$10.95 Ex GST
US$12.05 Inc GST


Weight: 0.05kgs


This Isolated 1Watt DC/DC converter is for use on the following DigiSpeed Controllers; DC-03DC-05DC-06 From a 5Vdc input, the converter generates an...
... more info

5V to 15V Isolated DC/DC converter

Add:
5V to 15V Isolated DC/DC converter
Model: PS-08
US$10.95 Ex GST
US$12.05 Inc GST


Weight: 0.05kgs


This Isolated 1 Watt DC/DC converter is for use on the following DigiSpeed Controllers; DC-03DC-05DC-06 From a 5Vdc input, the converter generates an...
... more info

5V to 5V Isolated DC/DC converter

Add:
5V to 5V Isolated DC/DC converter
Model: PS-16
US$10.95 Ex GST
US$12.05 Inc GST


Weight: 0.05kgs


This Isolated 0.75 Watt DC/DC converter is for use on the following DigiSpeed Controllers; DC-03DC-05DC-06 From a 5Vdc input, the converter generates...
... more info

6 Pin Plug and Socket set

Add:
6 Pin Plug and Socket set
Model: CN-06
US$4.00 Ex GST
US$4.40 Inc GST


Weight: 0.05kgs


Plug and socket set comprising of a chassis mount socket and a mating plug with a locking ring to ensure against accidental disconnections. 10A 100V...
... more info


Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock

wabusiness template