Spindle Control (DigiSpeed)

A DigiSpeed controller provides a means to control a VFD or motor controller from your CNC control software. The DigiSpeed replaces the manual speed potentiometer on your spindle speed controller, or connects to the speed control voltage input.

Choose the DigiSpeed and accessories that are right for your application by deciding what features you require. Use the Engineering note below to help in your Decision.

EN006 DigiSpeed Selection chart

View as:



DC-03
Homann Designs
DC-03 DigiSpeed GX V3

DC-03 DigiSpeed GX V3

The new DigiSpeed-DC-03 V3 generates an isolated interface for control of CNC equipment that requires an analog control voltage input; The board can generate the isolated analog voltage from the following sources. 0-5V Analog voltage signal as...

US$38.00 Ex GST
US$41.80 Inc GST

... more info
 Sold Out 

DC-02
Homann Designs
DC-02 DigiSpeed XL

DC-02 DigiSpeed XL

The DigiSpeed-XL   DC motor controller is designed to allow computer CNC programs such as Mach2, TurboCNC and other CNC programs to control the spindle speed of CNC machines such as Mills and Lathes. DigiSpeed-XL is designed primarily for...

US$56.00 Ex GST
US$61.60 Inc GST

... more info
 Sold Out 

DC-05
Homann Designs
DC-05 DigiSpeed MC

DC-05 DigiSpeed MC

The DigiSpeed-MC generates an isolated voltage interface for control of CNC equipment that requires an high frequency (2KHz - 100KHz) PWM input; The DigiSpeed-MC requires a regulated 5Vdc supply for operation. It is a perfect fit for your...

US$32.00 Ex GST
US$35.20 Inc GST

... more info
 Sold Out 

DC-04
Homann Designs
DC-04 DigiSpeed SL

DC-04 DigiSpeed SL

Designed for controlling KB electronics KBIC style DC motor controllers as used in Sherline lathes and mills. *** WARNING *** The KB Electronics DC speed controller circuit, and other similar speed controllers as found in Asian imported mini...

US$48.00 Ex GST
US$52.80 Inc GST

... more info
 Sold Out 

DC-04-D
Homann Designs
DC-04 DigiSpeed SL+ Deal

DC-04 DigiSpeed SL+ Deal

Designed for controlling KB electronics KBIC style DC motor controllers as used in Sherline lathes and mills. *** WARNING *** The KB Electronics DC speed controller circuit, and other similar speed controllers as found in Asian imported mini...

US$67.00 Ex GST
US$73.70 Inc GST

... more info
 Sold Out 

DA-01
Homann Designs
Mini Din Breakout Board

Mini Din Breakout Board

A 6 way 0.1' screw terminal provides access to the 6 pins of a PS/2 style minidin cable connector. The board contains two right angle brackets for direct mounting to a vertical panel. It can also be mounted to a horizonal panel. MiniDin Breakout...

US$18.00 Ex GST
US$19.80 Inc GST

Add:

PS-08
Homann Designs
5V to 15V Isolated DC/DC converter

5V to 15V Isolated DC/DC converter

This Isolated 1 Watt DC/DC converter is for use on the following DigiSpeed Controllers; DC-03DC-05DC-06 From a 5Vdc input, the converter generates an isolated 15Vdc, providing 66mA of current. The converter allows the DigiSpeed to generate an...

US$10.95 Ex GST
US$12.05 Inc GST

Add:

PS-07
Homann Designs
5V to 12V Isolated DC/DC converter

5V to 12V Isolated DC/DC converter

This Isolated 1Watt DC/DC converter is for use on the following DigiSpeed Controllers; DC-03DC-05DC-06 From a 5Vdc input, the converter generates an isolated 12Vdc, providing 70mA of current. The converter allows the DigiSpeed to generate an...

US$10.95 Ex GST
US$12.05 Inc GST

Add:

PS-16
Homann Designs
5V to 5V Isolated DC/DC converter

5V to 5V Isolated DC/DC converter

This Isolated 0.75 Watt DC/DC converter is for use on the following DigiSpeed Controllers; DC-03DC-05DC-06 From a 5Vdc input, the converter generates an isolated 5Vdc, providing 150mA of current. The converter allows the DigiSpeed to generate an...

US$10.95 Ex GST
US$12.05 Inc GST

Add:

PS-07
Homann Designs
12V to 12V Isolated DC/DC converter

12V to 12V Isolated DC/DC converter

This Isolated 1Watt DC/DC converter is for use on the following DigiSpeed Controllers; G5-BackPack From a 12Vdc input, the converter generates an isolated 12Vdc, providing 70mA of current. The converter allows the G5-Backpack to generate an isolated...

US$10.95 Ex GST
US$12.05 Inc GST

Add:

CB-02
Homann Designs
MiniDin Male to Male cable

MiniDin Male to Male cable

1.8 metre minidin Cable for connecting the DigiSpeed controller to the MiniDin breakout Board.

US$8.00 Ex GST
US$8.80 Inc GST

Add:

CB-03
Homann Designs
3.5mm Stereo Male to Male Cable

3.5mm Stereo Male to Male Cable

1.5 metre 3.5mm Stereo Cable for connecting your index pulse sensor to your breakout board via the DigiSpeed controller.

US$4.00 Ex GST
US$4.40 Inc GST

Add:

CB-04
Homann Designs
MiniDin Male to Female Extension cable

MiniDin Male to Female Extension cable

1.8 metre MiniDin Male to Female Extension Cable.

US$8.00 Ex GST
US$8.80 Inc GST

Add:



Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock

wabusiness template