PS-17 MeanWell 48Vdc 7.3A PLUS 24V 14.6A Power Supply

  Power Supply Two Pack.

 Containing a  LRS-350-48 and LRS-350-24 switch mode supply. This pair of power supplies has been packaged for use with the Shapeoko 2 CNC mill available here.

Of course they can be used for other purposes as well.

1 x MeanWell 48V DC 7.3A 350W  Power Supply

1 x MeanWell 24V DC 14.6A 350W  Power Supply

• AC input range selectable by switch
• Protections: Short circuit / Overload / Over voltage
• Forced air cooling by built-in DC fan
• PWM control and regulated
• Built-in cooling Fan ON-OFF control
• 100% full load burn-in test
• Fixed switching frequency at 25KHz

Datasheet