Quality Omron slot-type Photomicrosensor, prewired with a 1 metre cable. Ideal for home switches where repeatability is required. Can also be used for home switches.
Non-modulated Through-beam type, Grooved Type (L-shaped) Appearance, Pre-wired models (1m), Sensing distance 5 mm, Dark-ON/Light-ON (selectable), NPN Open collector output.
Photomicrosensor with 50- to 100-mA direct switching capacity for built-in applications.
Specifications.
Type |
Grooved Type (L-shaped) |
Luminous method |
Non-modulated |
Sensing method |
Through-beam type |
Sensing distance |
5 mm (slot width) |
Operation mode |
Dark-ON/Light-ON (selectable) |
Standard sensing object |
Opaque object (2 x 0.8 mm min.) |
Differential distance elements |
0.025 mm max. |
Light source ?Peak wavelength? |
Infrared LED (940 nm) |
Indicator |
Light indicator (red) |
Power supply voltage |
5 to 24 VDC ±10% (ripple (p-p)10% max.) |
Current consumption |
35 mA max. |
Control output ?Output type? |
NPN Open collector output |
Control output ?Load power supply voltage? |
5 to 24 VDC |
Control output ?Load current? |
100 mA max. |
Control output ?Residual voltage? |
0.8 V max. (at 100 mA load current)
0.4 V max. (at 40 mA load current) |
Response frequency elements |
1 kHz min. (average 3 kHz)
?See "Measurement condition of Response frequency elements"? |
Illumination on the surface receiver |
Fluorescent light: 1000 lx max. |
Ambient temperature |
Operating: -25 to 55 ?
Storage: -30 to 80 ?
?with no icing or condensation? |
Ambient humidity |
Operating: 5 to 85% RH
Storage: 5 to 95% RH
?with no icing or condensation? |
Vibration resistance |
20 to 2000 Hz, peak acceleration 100 m/s**2, 1.5-mm double amplitude 2 h each in X, Y, and Z directions (4 min periods) |
Shock resistance |
500 m/s**2, 3 times each in X, Y, and Z directions |
Degree of protection ?IEC60529? |
IP50 |
Connection method |
Pre-wired models |
Cable length |
1 m |
Material |
Case: Polybutylene phthalate (PBT)
Emitter/Receiver Cover: Polycarbonate(PC) |