This package contains the essential component to put together a 3 axis Stepper Drive Controller based around GeckoDrive G201X Stepper drives. The Kit used a 570 oz.in stepper motor for the z-axis.  If you plan to mount a power drawbar, Automatic Toolchanger to the head, or are after maximum rapid speeds on the z-axis  consider the Kit with a 1200oz.in motor for the Z-axis.
 
The Kit contains the following;

• 3 x  G201X Geckodrive Stepper drives
• 1 x  PS-16    48V 12.5A Switch mode power supply
• 1 x  PS-06    5V 3A Switch mode power supply
• 1 x  MB-02    MB-02V6 Breakout board
• 3 x SM-08   570 oz.in Bi-Polar Stepper motors 

G201X Stepper Controller Kit Wiring

G203V Stepper Controller Kit Wiring