This package contains the essential component to put together a Complete 4 axis Stepper Drive Controller based around the GeckoDrive G540 Stepper Controller.
This kit uses contains three 570oz.in motors that are rated at 5.0A/ph. The G540 will only supply these motors with 3.5A/ph meaning that the motors will deliver around 400 oz.in of torque and not the nameplate 570 oz.in.
These motors are a good choice if the power of the G540 is marginal as it provides an economical upgrade path if at a later stage you need more power than the G540 can provide.
The Kit contains the following;
- 1 x G540 Geckodrive Stepper Controller
- 1 x PS-19 9.4A 48V Linear Power supply
- 1 x SW-01 Emergency Stop Switch
- 1 x SW-06 IEC Power socket/fuse/ switch (fuse not included)
- 1 x CB-10 IEC Female Socket
- 2 x RL-04 48V coil 20A SPST Relay
- 3 x SM-08 570 oz.in Bi-Polar Stepper motors
G540 Stepper Controller Kit Wiring