Spring Loaded Rotary Engravers

The spring loaded design allows a constant depth engraving over an uneven surface. This saves valuable time when setting up for engraving. The tool has about 3/8" of travel. Spring tension fully adjustable from rear of tool.
View as:



BP-10

1/4" Shaft Spring Loaded Engraving Tool

1/4" Shaft Spring Loaded Engraving Tool

The spring loaded design allows a constant depth engraving over an uneven surface. This saves valuable time when setting up for engraving. The tool has about 3/8" of travel. Spring tension fully adjustable from rear of tool. Two spring rates...

US$109.99

Add:

BP-15

Spring Loaded Replacement Chamfer Mill 60°

Spring Loaded Replacement Chamfer Mill 60°

Replacement chamfer-mills for our spring loaded engraving tools. These tools are 100% american made micrograin solid carbide. Available angles are 60°, 90° and 120°. Angle: 90°. Shaft: 1/8"  

US$16.99

Add:

BP-17

Spring Loaded Replacement Chamfer Mill 120°

Spring Loaded Replacement Chamfer Mill 120°

Replacement chamfer-mills for our spring loaded engraving tools. These tools are 100% american made micrograin solid carbide. Available angles are 60°, 90° and 120°. Angle: 120° Degree Mill. Shaft: 1/8"  

US$16.99

Add:

BP-16

Spring Loaded Replacement Chamfer Mill 90°

Spring Loaded Replacement Chamfer Mill 90°

Replacement chamfer-mills for our spring loaded engraving tools. These tools are 100% american made micrograin solid carbide. Available angles are 60°, 90° and 120°. Angle: 90° Mill. Shaft: 1/8"  

US$16.99

Add:

BP-13

Spring Loaded Replacement End Mill 1/16"

Spring Loaded Replacement End Mill 1/16"

Replacement ball-mills for our spring loaded engraving tools. These tools are 100% american made micrograin solid carbide. Available sizes are 1/32" (.0312), 1/16" (.0625) and 1/8" (.125). Size: 1/16" Ball End Mill Shaft:...

US$16.99

Add:

BP-12

Spring Loaded Replacement End Mill 1/32"

Spring Loaded Replacement End Mill 1/32"

Replacement ball-mills for our spring loaded engraving tools. These tools are 100% american made micrograin solid carbide. Available sizes are 1/32" (.0312), 1/16" (.0625) and 1/8" (.125). Size: 1/32" Ball End Mill. Shaft:...

US$16.99

... more info
 Sold Out 

BP-14

Spring Loaded Replacement End Mill 1/8"

Spring Loaded Replacement End Mill 1/8"

Replacement ball-mills for our spring loaded engraving tools. These tools are 100% american made micrograin solid carbide. Available sizes are 1/32" (.0312), 1/16" (.0625) and 1/8" (.125). Size: 1/8" Ball End Mill Shaft:...

US$16.99

Add:



Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock

wabusiness template