SM-05
Homann DesignsThis is a single shaft bipolar 1200 oz-in Nema 34 Stepper Motor. Model Number: 4H2120-60-4A Specifications Size: Nema 34 Phase: 2 Phase Step Angle: 1.8 Degrees Voltage: 80V Max Phase Voltage 3.3V Current: 6A Resistance: 0.55 ohm/phase...
US$93.50
Ex GSTUS$102.85 Inc GST... more info Sold Out
SM-06
Homann DesignsThis is a dual shaft bipolar 155oz-in Nema 23 Stepper Motor, suitable for smaller Mills and lathes such as the Taig and Sherline machines. Model Number: 23H256-28-4B Specifications Size: Nema 23 (Size 57) Phase: 2 Phase Step Angle: 1.8 Degrees...
US$40.00 US$33.90 Ex GST
Save: 15% offUS$37.29 Inc GSTAdd:
CB-10
Homann DesignsSuper flexible four core cable perfect for larger stepper motors Cable Outer Diameter 7.5mmRed, Black, Blue, Yellow ConductorsConductors: 40x0.16mm2 OFCSold per Meter.
US$3.18
Ex GSTUS$3.50 Inc GSTAdd:
CB-09
GeckoDrive IncSuper flexible shielded four core cable perfect for stepper motors up to 3.5 A/Phase. This cable has been matched to work with the Gecko four Axis G540 Stepper Drives. Cable Outer Diameter 6.2mmRed, White, Black, Yellow ConductorsConductors: 11x0.2...
US$2.91
Ex GSTUS$3.20 Inc GSTAdd:
SM-02
GeckoDrive IncThis is a dual shaft bipolar 269 oz-in Nema 23 Stepper Motor, suitable for smaller Mills and lathes such as the Taig and Sherline machines. Model Number: 23H276-28-4B Specifications Size: Nema 23 (Size 57) Phase: 2 Phase Step Angle: 1.8 Degrees...
US$49.00
Ex GSTUS$53.90 Inc GST... more info Sold Out
SM-03
GeckoDrive IncThis is a dual shaft bipolar 387oz-in Nema 23 (60mm) Stepper Motor. This is the maximum size motor that can be used with the Geckodrive G540, G250 and G251 Model Number: 24H290-35-4B Specifications Size: Nema 24 (Size 60) Phase: 2 Phase Step...
US$57.00
Ex GSTUS$62.70 Inc GST... more info Sold Out
SM-08
Homann DesignsThis is a dual shaft bipolar 570oz-in Nema 24 (60mm) Stepper Motor. Model Number: 24H2100-50-4B Specifications Size: Nema 24 Phase: 2 Phase Step Angle: 1.8 Degrees Voltage: 50V Max Current: 5A Resistance: 0.6 ohm/phase Inductance: 2.1...
US$60.00
Ex GSTUS$66.00 Inc GST... more info Sold Out
SM-09
Homann DesignsThis is a single shaft bipolar 640oz-in Nema 34 Stepper Motor. Model Number: 4H280-60-4A Specifications Size: Nema 34 Phase: 2 Phase Step Angle: 1.8 Degrees Voltage: 80V Max Phase Voltage1.8V Current: 6A Resistance: 0.3 ohm/phase...
US$74.00
Ex GSTUS$81.40 Inc GSTAdd:
SM-07
Homann DesignsThis is a dual shaft bipolar 70oz-in Nema 23 Stepper Motor, suitable for smaller machines. Model Number: 17H27H-168-4B Specifications Size: Nema 17 Phase: 2 Phase Step Angle: 1.8 Degrees Voltage: 70V Max Current: 1.68A Resistance:1.7ohm...
US$24.00
Ex GSTUS$26.40 Inc GSTAdd:
GC-02
Homann DesignsThe GC-02 DB-9 Breakout board is a great complement to the GeckoDrive four axis G540 Stepper Drive system. It provides an easy way to connect the stepper motor cables to the G540. The GC-02 BOB has a 9 pin D-Type male connector on one end and easy...
US$24.00 US$17.49 Ex GST
Save: 27% offUS$19.24 Inc GSTAdd:
SM-10
GeckoDrive IncA neat solution to cover the stepper motor back side providing connector interface, motor wiringprotection and rear shaft (if applicable) protection. An aesthetic solution to a common problem Connector interface for easy maintenance and setup...
US$17.99
Ex GSTUS$19.79 Inc GSTAdd:
SM-11
GeckoDrive Inc A neat solution to cover the stepper motor back side providing connector interface, motor wiring protection and rear shaft (if applicable) protection. An aesthetic solution to a common problem Connector interface for easy maintenance and...
US$19.99
Ex GSTUS$21.99 Inc GSTAdd: