Motion Controllers

View as:



CB-18
Homann Designs
Cat5 RJ45 extension cable (1M)

Cat5 RJ45 extension cable (1M)

1 metre Cat 5 RJ45 patch cable. Perfect for connecting your Ethernet SmoothStepper to your PC. RJ45 Panel mount female to RJ45 male 1.This cable connects  hardware to a PC or Local Area Network (LAN) 2.Ideal for use with 10 Base-T, 100 Base-T and...

US$3.20 Ex GST
US$3.52 Inc GST

Add:

CB-11
GeckoDrive Inc
USB B Male to Female Panel Mount Cable

USB B Male to Female Panel Mount Cable

USB B male to B Female Panel Mount Extension Cable 0.4m This cable is has a USB B panel mount socket on one end an a USB B plug on the other. It is a perfect solution when mounting a Smoothstepper inside a CNC enclosure.

US$4.49 Ex GST
US$4.94 Inc GST

Add:

CB-19
Homann Designs
Cat5 RJ45 extension cable (3M)

Cat5 RJ45 extension cable (3M)

3 metre Cat 5 RJ45 patch cable. Perfect for connecting your Ethernet SmoothStepper to your PC. RJ45 Panel mount female to RJ45 male 1.This cable connects  hardware to a PC or Local Area Network (LAN) 2.Ideal for use with 10 Base-T, 100 Base-T and...

US$5.20 Ex GST
US$5.72 Inc GST

Add:

CB-05
Homann Designs
USB 2.0 A to B Cable 2m

USB 2.0 A to B Cable 2m

USB 2.0 A to B Cable 3.0m  Conforms to USB 2.0 Standard 480MBPS USB 4 Pin (A) Male to USB 4 Pin (B) Male. This cable is ideal for use with the SmoothStepper motion controller and USB pendants.

US$6.49 Ex GST
US$7.14 Inc GST

Add:

CB-17
Homann Designs
Panel Mount RJ45 extension cable (30cm)

Panel Mount RJ45 extension cable (30cm)

Panel Mount RJ45 extension cable. Perfect for mounting your Ethernet SmoothStepper inside your controller. RJ45 Panel mount female to RJ45 male CAT5 cable 300mm length

US$6.80 Ex GST
US$7.48 Inc GST

Add:

CB-13
Homann Designs
DB-25 Female to Male Adaptor

DB-25 Female to Male Adaptor

This convenient adaptor allows you to convert a printer cable from a Female DB-25 to a male DB-25 cable. This adaptor is perfect for use with the CB-06 IDC26 to DB-25 cable when used with the Smoother Stepper and Geckodrive G540.

US$7.09 Ex GST
US$7.80 Inc GST

Add:

CB-07
Homann Designs
26 pin IDC to 26 pin IDC Ribbon Cable

26 pin IDC to 26 pin IDC Ribbon Cable

Low Profile Header 26 pin connector on one end. Low Profile Header 26 pin connector on the other end. 300mm ribbon cable in between.

US$7.49 Ex GST
US$8.24 Inc GST

... more info

CB-06
Homann Designs
26 Pin to Female DB 25 Ribbon Cable

26 Pin to Female DB 25 Ribbon Cable

Low Profile Header 26 Pin connector on one end. Female DB25 connector on the other end of the ribbon cable. 300mm length

US$7.49 Ex GST
US$8.24 Inc GST

... more info

CB-12
Homann Designs
26 Pin to Male DB 25 Ribbon Cable

26 Pin to Male DB 25 Ribbon Cable

Low Profile Header 26 Pin connector on one end. Male DB25 connector on the other end of the ribbon cable. 300mm length

US$7.49 Ex GST
US$8.24 Inc GST

... more info

CB-26
Homann Designs
Panel Mount RJ45 extension cable (60cm)

Panel Mount RJ45 extension cable (60cm)

Panel Mount RJ45 extension cable. Perfect for mounting your Ethernet SmoothStepper inside your controller. RJ45 Panel mount female to RJ45 male CAT5 cable 600mm length

US$8.20 Ex GST
US$9.02 Inc GST

Add:

PS-06
Homann Designs
PS-06 Meanwell 5Vdc 3A Switch Mode Power Supply

PS-06 Meanwell 5Vdc 3A Switch Mode Power Supply

Model No. NES-15-05   Genuine Meanwell 5V DC 3A 15W  Power Supply AC input range 110V - 240V, 50/60HzOutput 5Vdc 3A Protections: Short circuit / Overload / Over voltageAuto Recovery after protectionLED Power Indicator Cooling by Free air...

US$15.00 Ex GST
US$16.50 Inc GST

Add:

PS-15
Homann Designs
PS-15 Meanwell MDR-10-5 DIN Rail 5V Power Supply

PS-15 Meanwell MDR-10-5 DIN Rail 5V Power Supply

Model No. MDR-10-5     Genuine Meanwell DIN Rail 5V DC 2A 10W  Power Supply 5Vdc 2A 10Watt Universal AC input/Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection Can be installed on DIN...

US$19.00 Ex GST
US$20.90 Inc GST

Add:

PS-14
Homann Designs
PS-14 Meanwell MDR-20-24 DIN Rail 24V Power Supply

PS-14 Meanwell MDR-20-24 DIN Rail 24V Power Supply

Model No. MDR-20-24   Genuine Meanwell DIN Rail 24V DC1.0A 20W  Power Supply 24Vdc 1.0A 20Watt Universal AC input/Full rangeProtections: Short circuit / Overload / Over voltageCooling by free air convectionCan be installed on DIN rail...

US$23.00 Ex GST
US$25.30 Inc GST

Add:

DC-05
Homann Designs
DC-05 DigiSpeed MC

DC-05 DigiSpeed MC

The DigiSpeed-MC generates an isolated voltage interface for control of CNC equipment that requires an high frequency (2KHz - 100KHz) PWM input; The DigiSpeed-MC requires a regulated 5Vdc supply for operation. It is a perfect fit for your...

US$32.00 Ex GST
US$35.20 Inc GST

... more info
 Sold Out 

UCSB

UCSB Single Port Breakout Board

UCSB Single Port Breakout Board

Single port opto-isolated breakout board. Features:  IDC26 port with standard LPT port pinout. 12 outputs and 5 inputs. All I/Os optical isolated with high speed 10Mbit/sec optocouplers. Open-drain Mosfet outputs for external relay control....

US$49.00 Ex GST
US$53.90 Inc GST

Add:

UCCNC

UCCNC software Licence

UCCNC software Licence

Works with the UC100, UC300, UC300ETH, UC400ETH and AXBB-E motion controllers * Please note that the UCCNC software is licensed per motion controller. One license key works with one motion controller only. The license keys are tied to the serial...

US$60.00 Ex GST
US$66.00 Inc GST

Add:

UCBB

UCBB Dual Port Breakout Board

UCBB Dual Port Breakout Board

Dual port opto-isolated breakout board. Features:  2x IDC26 ports with LPT port pinout. One standard LPT port and one input type LPT port. 16 outputs and 18 inputs. All I/Os optical isolated with high speed 10Mbit/sec optocouplers. Open-drain...

US$74.00 Ex GST
US$81.40 Inc GST

Add:

UC100

UC100 - USB Motion Controller

UC100 - USB Motion Controller

Works with UCCNC, Mach3 and Mach4 softwares Features: - Replaces a standard LPT ports. - Controls up to 6-axis simulteneously. - Works with the UCCNC software, Mach3 and Mach4. - Up to 100kHz step frequency operation. - USB connection to the...

US$109.00 Ex GST
US$119.90 Inc GST

Add:

UC400ETH

UC400ETH - Ethernet Motion Controller

UC400ETH - Ethernet Motion Controller

Works with UCCNC, Mach3 and Mach4 softwares Features: - Replaces 2 pieces of standard LPT ports. - Controls upto 6-axis simulteneously. - Works with the UCCNC software, Mach3 and Mach4. - Up to 400kHz step frequency operation. - Ethernet connection...

US$143.00 Ex GST
US$157.30 Inc GST

Add:

AXBB

AXBB-E ethernet motion controller and breakout board combined

AXBB-E ethernet motion controller and breakout board combined

Works with UCCNC, Mach3 and Mach4 softwares Features: - Complete motion controller and breakout board solution in a single board. - 8 optically isolated high speed N-channel power mosfet transistor outputs.(NPN) - 9 non-isolated buffered TTL...

US$185.00 Ex GST
US$203.50 Inc GST

Add:

SS-02
Homann Designs
SS-02 Ethernet SmoothStepper

SS-02 Ethernet SmoothStepper

The Ethernet SmoothStepper is a motion control device that connects to the Ethernet port of a computer. It accepts commands from a software package such as Mach3, Mach4, and produce very high quality pulse trains that drive step & direction...

US$198.00 Ex GST
US$217.80 Inc GST

... more info



Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock

wabusiness template