CNC Controllers Kits (G540)

CNC Controllers,Kits and components based around the Geckodrive G540.
Everything you need to put your controller together.
View as:



CC-01
GeckoDrive Inc
G540 Stepper Controller Package (No motors included)

G540 Stepper Controller Package (No motors included)

This package contains the essential component to put together a Complete 4 axis Stepper Drive Controller based around the GeckoDrive G540 Stepper Controller. The Kit contains the following; 1 x  G540     Geckodrive Stepper Controller1 x ...

US$365.00 Ex GST
US$401.50 Inc GST

... more info

CC-16
Homann Designs
G540 Stepper Controller Package (inc 3 x 155 oz.in Motors)

G540 Stepper Controller Package (inc 3 x 155 oz.in Motors)

This package contains the essential component to put together a Complete 4 axis Stepper Drive Controller based around the GeckoDrive G540 Stepper Controller. The Kit contains the following; 1 x  G540     Geckodrive Stepper Controller1 x ...

US$410.00 Ex GST
US$451.00 Inc GST

Add:

CB-09
GeckoDrive Inc
22 AWG Four Core shielded Stepper Motor Cable

22 AWG Four Core shielded Stepper Motor Cable

Super flexible shielded four core cable perfect for stepper motors up to 3.5 A/Phase. This cable has been matched to work with the Gecko four Axis G540 Stepper Drives. Cable Outer Diameter 6.2mmRed, White, Black, Yellow ConductorsConductors: 11x0.2...

US$2.91 Ex GST
US$3.20 Inc GST

Add:

CB-10
Homann Designs
18 AWG Four Core Stepper Motor Cable

18 AWG Four Core Stepper Motor Cable

Super flexible four core cable perfect for larger stepper motors Cable Outer Diameter 7.5mmRed, Black, Blue, Yellow ConductorsConductors: 40x0.16mm2 OFCSold per Meter.

US$3.18 Ex GST
US$3.50 Inc GST

Add:

CB-18
Homann Designs
Cat5 RJ45 extension cable (1M)

Cat5 RJ45 extension cable (1M)

1 metre Cat 5 RJ45 patch cable. Perfect for connecting your Ethernet SmoothStepper to your PC. RJ45 Panel mount female to RJ45 male 1.This cable connects  hardware to a PC or Local Area Network (LAN) 2.Ideal for use with 10 Base-T, 100 Base-T and...

US$3.20 Ex GST
US$3.52 Inc GST

Add:

CB-19
Homann Designs
Cat5 RJ45 extension cable (3M)

Cat5 RJ45 extension cable (3M)

3 metre Cat 5 RJ45 patch cable. Perfect for connecting your Ethernet SmoothStepper to your PC. RJ45 Panel mount female to RJ45 male 1.This cable connects  hardware to a PC or Local Area Network (LAN) 2.Ideal for use with 10 Base-T, 100 Base-T and...

US$5.20 Ex GST
US$5.72 Inc GST

Add:

CB-17
Homann Designs
Panel Mount RJ45 extension cable (30cm)

Panel Mount RJ45 extension cable (30cm)

Panel Mount RJ45 extension cable. Perfect for mounting your Ethernet SmoothStepper inside your controller. RJ45 Panel mount female to RJ45 male CAT5 cable 300mm length

US$6.80 Ex GST
US$7.48 Inc GST

Add:

CB-11
GeckoDrive Inc
USB B Male to Female Panel Mount Cable

USB B Male to Female Panel Mount Cable

USB B male to B Female Panel Mount Extension Cable 0.4m This cable is has a USB B panel mount socket on one end an a USB B plug on the other. It is a perfect solution when mounting a Smoothstepper inside a CNC enclosure.

US$4.49 Ex GST
US$4.94 Inc GST

Add:

CB-20
Homann Designs
Female DB 25 to Male DB 25 Ribbon Cable

Female DB 25 to Male DB 25 Ribbon Cable

Female DB25 connector on one end. Male DB25 connector on the other end of the ribbon cable. 300mm Standard length

US$12.00 Ex GST
US$13.20 Inc GST

... more info

G540
GeckoDrive Inc
G540 4-AXIS DIGITAL STEPPER MOTOR DRIVER

G540 4-AXIS DIGITAL STEPPER MOTOR DRIVER

 This is the latest REV-8 G540 drive The G540 is our most popular end-user focused product. Capable of driving four independent motors with its discrete internal motor controls at up to 50VDC and 3.5A per axis, it can move motors ranging from...

US$289.00 Ex GST
US$317.90 Inc GST

Add:

G540-PS
GeckoDrive Inc
Gecko G540 Stepper Drive + 48Vdc 7.3A Power Supply

Gecko G540 Stepper Drive + 48Vdc 7.3A Power Supply

This is a Geckodrive G540 REV-8 plus a Meanwell 48Vdc 7.3A switching power supply. The power supply is a perfect match for the G540. Don'y be fooled into purchasing a power supply with a larger current rating. This supply will drive 4 steppers...

US$320.00 Ex GST
US$352.00 Inc GST

Add:

PS-01
Homann Designs
PS-01 MeanWell Low Profile 48Vdc 7.3A Switch Mode Power Supply

PS-01 MeanWell Low Profile 48Vdc 7.3A Switch Mode Power Supply

  Model No. LRS-350-48   MeanWell 48V DC 7.3A 350W  Power Supply LRS-350 series is a 350W single-output enclosed type power with 30mm of low profile design. AC input range selectable by switch Protections: Short circuit /...

US$54.00 Ex GST
US$59.40 Inc GST

Add:

PS-10
Homann Designs
PS-10 MeanWell Low Profile 36Vdc 9.7A Switch Mode Power Supply

PS-10 MeanWell Low Profile 36Vdc 9.7A Switch Mode Power Supply

    Model No. LRS-350-36   MeanWell36V DC 9.7A 350W  Power Supply LRS-350 series is a 350W single-output enclosed type power with 30mm of low profile design. AC input range selectable by switch Protections: Short circuit /...

US$49.00 Ex GST
US$53.90 Inc GST

Add:

GH-02

G540 Heatsink Kit

G540 Heatsink Kit

This heaksink kit is ideal for helping to keep your G540 cool when using motors that draw more than 3A. Each of the three 40mm x 40mm  heatsinks in the kit have a thermal heat-sink adhesive pad allowing for easy attachment to the G540 stepper...

US$24.00 Ex GST
US$26.40 Inc GST

Add:

SM-02
GeckoDrive Inc
269 Oz-in NEMA 23 Stepper Motor (Dual Shaft)

269 Oz-in NEMA 23 Stepper Motor (Dual Shaft)

This is a dual shaft bipolar  269 oz-in Nema 23 Stepper Motor, suitable for smaller Mills and lathes such as the Taig and Sherline machines. Model Number: 23H276-28-4B Specifications Size: Nema 23 (Size 57) Phase: 2 Phase Step Angle: 1.8 Degrees...

US$49.00 Ex GST
US$53.90 Inc GST

... more info
 Sold Out 

SM-03
GeckoDrive Inc
387 Oz-in NEMA 24 Stepper Motor (Dual Shaft)

387 Oz-in NEMA 24 Stepper Motor (Dual Shaft)

This is a dual shaft bipolar  387oz-in Nema 23  (60mm) Stepper Motor. This is the maximum size motor that can be used with the Geckodrive G540, G250 and G251 Model Number: 24H290-35-4B Specifications Size: Nema 24 (Size 60) Phase: 2 Phase Step...

US$57.00 Ex GST
US$62.70 Inc GST

... more info
 Sold Out 

EN-03
GeckoDrive Inc
Aluminium Controller Enclosure

Aluminium Controller Enclosure

This cabinet is an ideal enclosure for a G540 based controller. It has pre-punched ventilation holes top and bottom, M4 metal thread fastening screws, aluminium pre- painted front and rear panels, up to the minute styling and facilities to mount...

US$46.00 Ex GST
US$50.60 Inc GST

Add:

CB-25
Homann Designs
2 metre DB25 Male to DB25 Male printer port cable

2 metre DB25 Male to DB25 Male printer port cable

This is a 2 metre printer port cable with a DB25 male connector on both ends. Perfect for connecting your CNC controller to your computer.

US$7.50 Ex GST
US$8.25 Inc GST

Add:

CB-24
Homann Designs
5 metre DB25 Male to DB25 Male printer port cable

5 metre DB25 Male to DB25 Male printer port cable

This is a 5 metre printer port cable with a DB25 male connector on both ends. Perfect for connecting your CNC controller to your computer.

US$14.80 Ex GST
US$16.28 Inc GST

Add:

CB-16
Homann Designs
2 metre IEC320 Power Lead

2 metre IEC320 Power Lead

3 metre mains lead with SAA Plug to IEC320 line socket. Perfect for powering your CNC controller.

US$4.90 Ex GST
US$5.39 Inc GST

Add:

CB-15
Homann Designs
5 metre IEC320 Power Lead

5 metre IEC320 Power Lead

5 metre mains lead with SAA Plug to IEC320 line socket. Perfect for powering your CNC controller.

US$14.80 Ex GST
US$16.28 Inc GST

Add:

CB-08
GeckoDrive Inc
IEC320 to SAA Power Socket Cable

IEC320 to SAA Power Socket Cable

150mm mains IEC320 Line plug to SAA Australian 3 pin mains socket.

US$9.85 Ex GST
US$10.84 Inc GST

Add:

GC-01V2
Homann Designs
GC-01 V2 Gecko 540 Chiller

GC-01 V2 Gecko 540 Chiller

 The GC-01 is a cooling fan system for the Gecko G540 4axis drive system. The GC-01 mounts to the back of the G540 by the supplies steel stand-offs, positioning the fans approximately 1/4" above the back plate of the drive. GeckoDrive...

US$39.00 Ex GST
US$42.90 Inc GST

Add:

SW-08
Homann Designs
Omron Limit Microswitch with Roller

Omron Limit Microswitch with Roller

Quality Omron Limit Microswitch with roller. Specifications Contacts Form : Normally Open (NO) and Normally Closed (NC) connectionsContact Material:   Silver AlloyLever: 5mm RollerMechanical Life: 10,000,00 operations minimumElectrical Life:...

US$2.80 Ex GST
US$3.08 Inc GST

Add:

GC-02
Homann Designs
GC-02 DB-9 Stepper Breakout Board. (Four-Pack)

GC-02 DB-9 Stepper Breakout Board. (Four-Pack)

The GC-02 DB-9 Breakout board is a great complement to the GeckoDrive four axis G540 Stepper Drive system. It provides an easy way to connect the stepper motor cables to the G540. The GC-02 BOB has a 9 pin D-Type male connector on one end and easy...

US$24.00
US$17.49 Ex GST
Save: 27% off

US$19.24 Inc GST

Add:

GC-04
Homann Designs
GC-04 DB-9 I/O Breakout Board

GC-04 DB-9 I/O Breakout Board

The GC-04 DB-9 I/0 Breakout board is a great complement to the GeckoDrive four axis G540 Stepper Drive system. It provides an easy way to connect to the G540 VFD and input terminals without the need for soldering. The GC-04 BOB has two 9 pin D-Type...

US$24.00 Ex GST
US$26.40 Inc GST

Add:

SM-10
GeckoDrive Inc
NEMA 23 Stepper Motor Back Cover Kit

NEMA 23 Stepper Motor Back Cover Kit

A neat solution to cover the stepper motor back side providing connector interface, motor wiringprotection and rear shaft (if applicable) protection. An aesthetic solution to a common problem Connector interface for easy maintenance and setup...

US$17.99 Ex GST
US$19.79 Inc GST

Add:

CN-07
Homann Designs
DB9 Male connector

DB9 Male connector

DB9 Male connector Male 9 pin DB9 solder connector

US$1.50 Ex GST
US$1.65 Inc GST

Add:

CN-08
Homann Designs
DB9 Female connector

DB9 Female connector

DB9 Female connector Female 9 pin DB9 solder connector

US$1.50 Ex GST
US$1.65 Inc GST

Add:

CN-09
Homann Designs
DB9 Back shell

DB9 Back shell

DB9 Back shell Back shell for 9 pin DB9 solder connectors

US$2.12 Ex GST
US$2.33 Inc GST

Add:

SW-01
Homann Designs
Latching Emergency Stop Switch

Latching Emergency Stop Switch

Latching Emergency Stop Switch Essential for installations of CNC equipment. Latching actuator with rotating release and normally closed contacts. When the actuator is pushed in, the contacts open and the switch is latched, ensuring the equipment...

US$9.20 Ex GST
US$10.12 Inc GST

Add:

SW-12
Homann Designs
SPST Mini Rocker Switch

SPST Mini Rocker Switch

SPDT switch with black body and black actuator.Spade lug connections. This switch is ideal as an enable switch your CNC controller 240V 6A. Snap in fitting.  Cutout size 6.5(W) x 19(H)mm

US$2.90 Ex GST
US$3.19 Inc GST

Add:

SW-07
Homann Designs
DPDT Power Rocker Switch

DPDT Power Rocker Switch

DPDT switch with black body and black actuator.Spade lug connections. This switch is perfect for your CNC controller 240V 16A. Snap in fitting.  

US$3.69 Ex GST
US$4.06 Inc GST

Add:

RL-04
GeckoDrive Inc
48V 20A SPST Panel Mount Relay

48V 20A SPST Panel Mount Relay

  48VDC SPST Panel Mount Relay Rugged construction, panel mounted and quick connect terminals for easy installation.The relay contacts are normally open and close when the coil is energised with 48Vdc. SPST PANEL MOUNT RELAYS These relays are...

US$8.49 Ex GST
US$9.34 Inc GST

Add:

GC-12
Homann Designs
GC-12 DB-9 Stepper Screw terminal Breakout Board.

GC-12 DB-9 Stepper Screw terminal Breakout Board.

The  DB-9 stepper screw terminal Breakout board is a great complement to the Gecko Drive four axis G540 Stepper Drive system. It provides an easy way to connect the stepper motor cables to the G540 without soldering. The BOB has a 9 pin D-Type...

US$8.80 Ex GST
US$9.68 Inc GST

Add:

GC-13
Homann Designs
GC-13 DB-9 Male Screw terminal Breakout Board.

GC-13 DB-9 Male Screw terminal Breakout Board.

The  DB-9 male screw terminal Breakout board is a great complement to the HDC-01 Four Axis controller system. It provides an easy way to connect cables to the DB9 male connector The  BOB has a male 9 pin D-Type connector on one end...

US$6.90 Ex GST
US$7.59 Inc GST

Add:

GC-14
Homann Designs
GC-14 DB-9 Female Screw terminal Breakout Board.

GC-14 DB-9 Female Screw terminal Breakout Board.

The DB-9 Female screw terminal Breakout board is a great complement to the HDC-01 Four Axis controller system. It provides an easy way to connect cables to the DB9 female connector The  BOB has a female 9 pin D-Type connector on one end...

US$6.90 Ex GST
US$7.59 Inc GST

Add:

SW-06
GeckoDrive Inc
IEC Chassis Male Power Plug with Switch, Fuse Holder

IEC Chassis Male Power Plug with Switch, Fuse Holder

IEC Chassis male power plug with an integral switch and fuse. Perfect for your CNC controller box. Cut-out dimensions  47mmx27.5mmDouble Pole Single Throw switch (DPST)Integral Fuse holder (Fuse not included)

US$7.50 Ex GST
US$8.25 Inc GST

Add:

CN-12
GeckoDrive Inc
IEC Chassis Power Socket Female

IEC Chassis Power Socket Female

IEC Chassis Female power socket. Perfect for your CNC controller box. Cut-out dimensions  32mm x 24.6mmSnap In, suits 1.5mm thick panels Rated at 250Vac 10A

US$4.49 Ex GST
US$4.94 Inc GST

Add:

LB-01
Homann Designs
Labour Charge/hr

Labour Charge/hr

Labour Cost

US$28.00 Ex GST
US$30.80 Inc GST

Add:



Featured Products - Drives & Controls

G540 4-AXIS DIGITAL STEPPER MOTOR DRIVER
US$289.00 Ex GST
US$317.90 Inc GST
More details

Specials

GC-02 DB-9 Stepper Breakout Board. (Four-Pack)GC-02 DB-9 Stepper Bre...US$24.00
US$17.49 Ex GST
Save: 27% off

US$19.24 Inc GST

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock

wabusiness template