CB-18
Homann Designs
1 metre Cat 5 RJ45 patch cable. Perfect for connecting your Ethernet SmoothStepper to your PC. RJ45 Panel mount female to RJ45 male 1.This cable connects hardware to a PC or Local Area Network (LAN) 2.Ideal for use with 10 Base-T, 100 Base-T and...
US$3.20
Add:
CB-11
GeckoDrive Inc
USB B male to B Female Panel Mount Extension Cable 0.4m This cable is has a USB B panel mount socket on one end an a USB B plug on the other. It is a perfect solution when mounting a Smoothstepper inside a CNC enclosure.
US$4.49
Add:
CB-19
Homann Designs3 metre Cat 5 RJ45 patch cable. Perfect for connecting your Ethernet SmoothStepper to your PC. RJ45 Panel mount female to RJ45 male 1.This cable connects hardware to a PC or Local Area Network (LAN) 2.Ideal for use with 10 Base-T, 100 Base-T and...
US$5.20
Add:
CB-05
Homann Designs
USB 2.0 A to B Cable 3.0m Conforms to USB 2.0 Standard 480MBPS USB 4 Pin (A) Male to USB 4 Pin (B) Male. This cable is ideal for use with the SmoothStepper motion controller and USB pendants.
US$6.49
Add:
CB-17
Homann Designs
Panel Mount RJ45 extension cable. Perfect for mounting your Ethernet SmoothStepper inside your controller. RJ45 Panel mount female to RJ45 male CAT5 cable 300mm length
US$6.80
Add:
CB-07
Homann Designs
Low Profile Header 26 pin connector on one end. Low Profile Header 26 pin connector on the other end. 300mm ribbon cable in between.
US$7.49
... more infoCB-06
Homann Designs
Low Profile Header 26 Pin connector on one end. Female DB25 connector on the other end of the ribbon cable. 300mm length
US$7.49
... more infoCB-12
Homann Designs
Low Profile Header 26 Pin connector on one end. Male DB25 connector on the other end of the ribbon cable. 300mm length
US$7.49
... more infoPS-06
Homann Designs
Model No. NES-15-05 Genuine Meanwell 5V DC 3A 15W Power Supply AC input range 110V - 240V, 50/60HzOutput 5Vdc 3A Protections: Short circuit / Overload / Over voltageAuto Recovery after protectionLED Power Indicator Cooling by Free air...
US$16.00
Add:
DC-05
Homann Designs
The DigiSpeed-MC generates an isolated voltage interface for control of CNC equipment that requires an high frequency (2KHz - 100KHz) PWM input; The DigiSpeed-MC requires a regulated 5Vdc supply for operation. It is a perfect fit for your...
US$32.00
... more info Sold Out SS-01
Homann Designs
The USB SmoothStepper is a motion control device that connects to the USB port of a computer. It accepts commands from a software package such as Mach3, and produce very high quality pulse trains that drive step & direction motors. At this time...
US$160.00
... more infoSS-02
Homann Designs
The Ethernet SmoothStepper is a motion control device that connects to the Ethernet port of a computer. It accepts commands from a software package such as Mach3, and produce very high quality pulse trains that drive step & direction stepper and...
US$190.00
Add:
SS-02-PS
Homann DesignsThe Ethernet SmoothStepper is a motion control device that connects to the Ethernet port of a computer. It accepts commands from a software package such as Mach3, and produce very high quality pulse trains that drive step & direction stepper and...
US$203.00
... more info Sold Out 
