CNC Controller Kits(G203V G201X)

CNC Controller kits based around discrete Gecko drives. These are ideal for the larger CNC conversions
View as:



CC-17
Homann Designs
Lathe Stepper Controller Package 1

Lathe Stepper Controller Package 1

  This package contains the essential component to put together a 2 axis Stepper Drive Controller based around GeckoDrive G201X Stepper drives. The Kit uses  640oz.in stepper motors for the X and Y axes,   The Kit contains the...

US$430.00 Ex GST
US$473.00 Inc GST

... more info

CB-10
Homann Designs
18 AWG Four Core Stepper Motor Cable

18 AWG Four Core Stepper Motor Cable

Super flexible four core cable perfect for larger stepper motors Cable Outer Diameter 7.5mmRed, Black, Blue, Yellow ConductorsConductors: 40x0.16mm2 OFCSold per Meter.

US$3.18 Ex GST
US$3.50 Inc GST

Add:

MB-02
Homann Designs
MB-02-V6 Bidirectional Breakout Board

MB-02-V6 Bidirectional Breakout Board

The MB-02-V6 is a simple but robust breakout board that provides a convenient and safe way to interface your CNC components to your PC via the parallel port. Additionally the Breakout board may be used to connect your CNC components to a Smooth...

US$43.00 Ex GST
US$47.30 Inc GST

... more info
 Sold Out 

DC-03
Homann Designs
DC-03 DigiSpeed GX V3

DC-03 DigiSpeed GX V3

The new DigiSpeed-DC-03 V3 generates an isolated interface for control of CNC equipment that requires an analog control voltage input; The board can generate the isolated analog voltage from the following sources. 0-5V Analog voltage signal as...

US$38.00 Ex GST
US$41.80 Inc GST

... more info
 Sold Out 

RL-07
Homann Designs
Dual Channel 5V Relay module

Dual Channel 5V Relay module

  Dual Channel 5V Relay Module This is a dual channel 5V coil relay module.This board is ideal for use with the MB-02V6 Breadout board Active Hi or Active Low  selection jumper Contact Form: SPDT Contact Rating 10A Coil Voltage 5V...

US$14.60 Ex GST
US$16.06 Inc GST

Add:

PS-09
GeckoDrive Inc
PS-16 MeanWell 48Vdc 12.5A Switch Mode Power Supply

PS-16 MeanWell 48Vdc 12.5A Switch Mode Power Supply

  Model No. SE-600-48 MeanWell 48V DC 12.5A 350W  Power Supply AC input active surge current limitingAC input range selectable by switchProtections: Short circuit / Overload / Over voltageForced air cooling by built-in DC fanPWM control and...

US$109.00 Ex GST
US$119.90 Inc GST

Add:

PS-06
Homann Designs
PS-06 Meanwell 5Vdc 3A Switch Mode Power Supply

PS-06 Meanwell 5Vdc 3A Switch Mode Power Supply

Model No. NES-15-05   Genuine Meanwell 5V DC 3A 15W  Power Supply AC input range 110V - 240V, 50/60HzOutput 5Vdc 3A Protections: Short circuit / Overload / Over voltageAuto Recovery after protectionLED Power Indicator Cooling by Free air...

US$15.00 Ex GST
US$16.50 Inc GST

Add:

SM-08
Homann Designs
570 Oz-in NEMA 24 Stepper Motor (Dual Shaft)

570 Oz-in NEMA 24 Stepper Motor (Dual Shaft)

This is a dual shaft bipolar  570oz-in Nema 24 (60mm) Stepper Motor. Model Number: 24H2100-50-4B Specifications Size: Nema 24 Phase: 2 Phase Step Angle: 1.8 Degrees Voltage: 50V Max Current: 5A Resistance: 0.6 ohm/phase Inductance: 2.1...

US$60.00 Ex GST
US$66.00 Inc GST

... more info
 Sold Out 

SM-09
Homann Designs
640 Oz-in NEMA 34 Stepper Motor

640 Oz-in NEMA 34 Stepper Motor

This is a single shaft bipolar  640oz-in Nema 34 Stepper Motor. Model Number: 4H280-60-4A Specifications Size: Nema 34 Phase: 2 Phase Step Angle: 1.8 Degrees Voltage: 80V Max Phase Voltage1.8V Current: 6A Resistance: 0.3 ohm/phase...

US$74.00 Ex GST
US$81.40 Inc GST

Add:

SM-05
Homann Designs
1200 Oz-in NEMA 34 Stepper Motor

1200 Oz-in NEMA 34 Stepper Motor

This is a single shaft bipolar  1200 oz-in Nema 34 Stepper Motor. Model Number: 4H2120-60-4A Specifications Size: Nema 34 Phase: 2 Phase Step Angle: 1.8 Degrees Voltage: 80V Max Phase Voltage 3.3V Current: 6A Resistance: 0.55 ohm/phase...

US$93.50 Ex GST
US$102.85 Inc GST

... more info
 Sold Out 

SW-11
Homann Designs
Omron Sealed Mechanical switch Short Lever (QC Tabs)

Omron Sealed Mechanical switch Short Lever (QC Tabs)

Quality Omron Watertight Snap action micro switch with short lever with roller suitable for limit and/or home switches. High-quality watertight , high-precision miniature Snap Action switch. Switch Body meets IP67 requirements Use of epoxy resin...

US$20.00 Ex GST
US$22.00 Inc GST

Add:

SM-11
GeckoDrive Inc
NEMA 34Stepper Motor Back Cover Kit

NEMA 34Stepper Motor Back Cover Kit

 A neat solution to cover the stepper motor back side providing connector interface, motor wiring protection and rear shaft (if applicable) protection. An aesthetic solution to a common problem Connector interface for easy maintenance and...

US$19.99 Ex GST
US$21.99 Inc GST

Add:

SW-01
Homann Designs
Latching Emergency Stop Switch

Latching Emergency Stop Switch

Latching Emergency Stop Switch Essential for installations of CNC equipment. Latching actuator with rotating release and normally closed contacts. When the actuator is pushed in, the contacts open and the switch is latched, ensuring the equipment...

US$9.20 Ex GST
US$10.12 Inc GST

Add:

RL-05
Homann Designs
24-480Vac 25A SSR Solid State Relay

24-480Vac 25A SSR Solid State Relay

Single phase solid state relay.     Features:     Built-in varistor effectively absorb external surges Zero crossing turn on circuit for lower EMI generation Includes internal snubber for switching inductive loads like motors...

US$17.00 Ex GST
US$18.70 Inc GST

Add:

SW-06
GeckoDrive Inc
IEC Chassis Male Power Plug with Switch, Fuse Holder

IEC Chassis Male Power Plug with Switch, Fuse Holder

IEC Chassis male power plug with an integral switch and fuse. Perfect for your CNC controller box. Cut-out dimensions  47mmx27.5mmDouble Pole Single Throw switch (DPST)Integral Fuse holder (Fuse not included)

US$7.50 Ex GST
US$8.25 Inc GST

Add:

LB-01
Homann Designs
Labour Charge/hr

Labour Charge/hr

Labour Cost

US$28.00 Ex GST
US$30.80 Inc GST

Add:



Featured Products - Controllers and Kits

MB-02-V6 Bidirectional Breakout Board
US$43.00 Ex GST
US$47.30 Inc GST
More details Sold Out 

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock

wabusiness template