Power Supplies

400V 25Amp Bridge Rectifier. Perfect for your CNC Power Supply.

150mm mains IEC320 Line plug to SAA Australian 3 pin mains socket.

115VAC 80mm x 80mm x 35mm metal ball bearing Fan. Perfect for cooling your controller. Note: If your mains voltage is 220-240VAC, put 2 of these fans in series.

Perfect for cooling your Controller. Air Flow: 39CFM Type: DC Brushless Speed: 2450 RPM Current: 0.23A Noise Level: 34dBA Manuf.: NMB

Power Supply Mounting Bracket Accessory Mount bracket kit for your Meanwell NES-350 power supplies. Kit contains four brackets Features: Size: 0.767"L x 0.60"W x 0.625"HUses metric screws (not included)

Power Supply Mounting Bracket Accessory Mount bracket kit for your Meanwell SE-600 power supplies. Kit contains four brackets Features: Size: 1.62"L x 0.67"W x 0.60"HUses metric screws (not included)

  Model No. LRS-350-48   MeanWell 48V DC 7.3A 350W  Power Supply LRS-350 series is a 350W single-output enclosed type power with 30mm of low profile design. AC input range selectable by switch Protections: Short circuit /...

Model No. NES-15-05   Genuine Meanwell 5V DC 3A 15W  Power Supply AC input range 110V - 240V, 50/60HzOutput 5Vdc 3A Protections: Short circuit / Overload / Over voltageAuto Recovery after protectionLED Power Indicator Cooling by Free air...

This Isolated 1Watt DC/DC converter is for use on the following DigiSpeed Controllers; DC-03DC-05DC-06 From a 5Vdc input, the converter generates an isolated 12Vdc, providing 70mA of current. The converter allows the DigiSpeed to generate an...

This Isolated 1 Watt DC/DC converter is for use on the following DigiSpeed Controllers; DC-03DC-05DC-06 From a 5Vdc input, the converter generates an isolated 15Vdc, providing 66mA of current. The converter allows the DigiSpeed to generate an...

  Model No. SE-600-48 MeanWell 48V DC 12.5A 350W  Power Supply AC input active surge current limitingAC input range selectable by switchProtections: Short circuit / Overload / Over voltageForced air cooling by built-in DC fanPWM control and...

    Model No. LRS-350-36   MeanWell36V DC 9.7A 350W  Power Supply LRS-350 series is a 350W single-output enclosed type power with 30mm of low profile design. AC input range selectable by switch Protections: Short circuit /...

    Model No. LRS-350-24   MeanWell 24V DC 14.6A 350W  Power Supply LRS-350 series is a 350W single-output enclosed type power with 30mm of low profile design. AC input range selectable by switch Protections: Short circuit...

Model No. NES-15-12   Genuine Meanwell 5V DC 3A 15W  Power Supply AC input range 110V - 240V, 50/60HzOutput 5Vdc 1.25A Protections: Short circuit / Overload / Over voltageAuto Recovery after protectionLED Power Indicator Cooling by Free air...

Model No. MDR-20-12   Genuine Meanwell DIN Rail 12V DC1.67A 20W  Power Supply 12Vdc 1.67A 20Watt Universal AC input/Full rangeProtections: Short circuit / Overload / Over voltageCooling by free air convectionCan be installed on DIN rail...

Model No. MDR-20-24   Genuine Meanwell DIN Rail 24V DC1.0A 20W  Power Supply 24Vdc 1.0A 20Watt Universal AC input/Full rangeProtections: Short circuit / Overload / Over voltageCooling by free air convectionCan be installed on DIN rail...

Model No. MDR-10-5     Genuine Meanwell DIN Rail 5V DC 2A 10W  Power Supply 5Vdc 2A 10Watt Universal AC input/Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection Can be installed on DIN...

This Isolated 0.75 Watt DC/DC converter is for use on the following DigiSpeed Controllers; DC-03DC-05DC-06 From a 5Vdc input, the converter generates an isolated 5Vdc, providing 150mA of current. The converter allows the DigiSpeed to generate an...

  Power Supply Two Pack.   Containing a  LRS-350-48 and LRS-350-24 switch mode supply. This pair of power supplies has been packaged for use with the Shapeoko 2 CNC mill available here. Of course they can be used for other purposes...

  Model No. NES-450-48   MeanWell 48V DC 7.3A 450W  Power Supply AC input range selectable by switch Protections: Short circuit / Overload / Over voltage/ Over temperature Forced air cooling by built-in DC fan Built-in...

Model No. NES-15-24     Genuine Meanwell 24V DC0.7A 15W  Power Supply AC input range 110V - 240V, 50/60Hz Output 24Vdc 0.7A Protections: Short circuit / Overload / Over voltage Auto Recovery after protection LED Power Indicator...

Latching Emergency Stop Switch Essential for installations of CNC equipment. Latching actuator with rotating release and normally closed contacts. When the actuator is pushed in, the contacts open and the switch is latched, ensuring the equipment...

IEC Chassis male power plug with an integral switch and fuse. Perfect for your CNC controller box. Cut-out dimensions  47mmx27.5mmDouble Pole Single Throw switch (DPST)Integral Fuse holder (Fuse not included)